Türkçe
H20 Vario formwork combines H20 timber beams, steel walers and plywood facing to create wall and column panels sized for the project. It provides a project-specific panel approach when standard modular steel-panel dimensions do not fit the required geometry.
Main System Components
- H20 timber beams
- Steel wall or column walers
- Plywood form-facing surface
- Beam-to-waler connections
- Tie rods, nuts and plates
- Brace and working-platform connections
- Corner and stop-end components where required
How H20 Beams Work in the Panel
The H20 beams support the plywood facing while steel walers connect the beam layout into a complete panel. Panel dimensions and connection details are arranged around the project geometry.
Wall and Column Applications
The same timber-beam panel principle can be configured for wall and column formwork. Panel dimensions, corners and connection details vary with the concrete geometry.
Vario vs Modular Panel Formwork
Modular panel formwork uses ready-made steel-framed panels. H20 Vario panels are assembled from beams, plywood and steel walers according to the required panel size. See Trio Panel Formwork vs H20 Timber-Beam Formwork.
For H20 beam information, see What Is an H20 Timber Beam?.
H20 Single-Sided Wall Formwork Product
For a single-sided wall-formwork example, see H20 Beam Single-Sided Wall Formwork | Vario Formwork. The current product data lists H20 beam lengths of 245-490 cm and panel widths of 50-600 cm.
H20 Wall and Column Formwork Product
For a Vario product covering both wall and column applications, see H20 Beam Wall and Column Formwork | Vario System. The current product data lists H20 beam lengths of 245-490 cm and panel widths of 50-600 cm.
H20 Double-Sided Wall Formwork Product
For an opposing-panel wall-formwork application, see Double-Sided Wall Formwork | H20 Beam Vario Formwork. The product page includes the currently listed H20 beam lengths, panel widths and system components.